www.woodandpanel.com : WoodWorking Digital Magazine

Wood & Panel Europe

Menu Close Menu

Leuco introduces grooving cutter for CNC machines

Published on :Thursday, March 5, 2020

LEUCO offers the first grooving cutter with a cutting width of 8.5 mm for CNC machines. To obtain this width, a grooving cutter 5 mm and two passes have often been necessary. The new grooving cutters of LEUCO can speed up the grooving process and double the edge life of the tool.


The secret of the new grooving cutter is the LEUCO g5-System which is available from LEUCO for different applications and machines. LEUCO now uses this serration for a grooving cutter with a width of 8.5 mm. Thanks to the special tooth geometry and arrangement, the cutting pressure is reduced and, for this reason, also the driving power of the motor. This is why the grooving cutter can be used with motors which are designed to drive grooving cutters of a width of 4 and 5 mm.


Due to the smooth G5 serration of LEUCO, it is possible to produce 8.5 mm wide grooves in a single step also on smaller CNC machines. Using the new g5 saw blade, wide grooves can be produced more quickly. At the same time, the edge life is doubled since the saw blade does only perform one processing step instead of two.


High cutting quality for all coatings


Another benefit of the new grooving cutter from LEUCO is the excellent cutting quality. Solid wood, plastics or varnished surfaces: the grouped profile consisting of 5 teeth each is able to saw wood even with hard or sensitive coatings. This is perfect for grooves in cabinet, showcase or commode parts for the manufacturers of high-quality furniture or furniture parts.


Moreover, the new grooving cutter does only generate a low noise level like all saw blades of the g5-System which will improve the work environment in the processing plant. This makes the new saw blade the favorite for the production of wide grooves on CNC machines.




Tags: , , , ,

Comments are closed.