Wednesday, November 1, 2023
Listen to this news
LEUCO advances tooling with all new top coating. LEUCO nn-system [no noise] DP flex circular saw blades are known in the market for long tool life and tear-free cutting quality in a very wide mix of materials. In addition, the diamond-tipped saw blade, with a graceful cutting width of 2.5 mm is particularly quiet in use and when idling.
Especially with very resinous materials or with miter cuts, resin tends to form on the flanks of saws in the nn-system DP flex. This is because the teeth do not protrude far. To retain a good average cutting result over extensive service lives, LEUCO has recommended cleaning the blades as cut quality declines.
With immediate effect, to make these blades even easier for operators to use, LEUCO is supplying its nn-system DP flex with a newly developed coating called ‘LEUCO topcoat’. This combination of corrosion inhibitor and non-stick coating substantially reduces the formation of resin on the flanks, minimizing the amount of cleaning required.
Saw blades are available in different diameters and are suitable for many types of machine. This includes sizing saws, vertical panel sizing saws or CNC systems. The nn-system DP flex blades are remarkably thin, with a cutting width of just 2.5 mm.
Previosly, LEUCO presented their versatile and precise diamond-tipped sawblade collection which offers the flexibility within it’s system. The saw blade delivers sharp and tear-free miters that are a real challenge for craftsmen.
With the circular saw blades in LEUCO’s nn-System DP flex, users benefit from long tool service lives, a high quality of chip-free cuts and excellent miters. Also, a diverse range of materials can be sawed, and the diamond-tipped saw blade is unusually quiet. Saw blades are available in different diameters and are suitable for many types of machine. These include sizing saws, vertical panel sizing saws or CNC systems.
Great Cutting Quality on CNC Systems
Due to the high quality of saw cuts, nn-System DP flex blades are very well suited for use on CNC systems.