Tuesday, April 21, 2026
Hymmen is redefining wood-based panel processing by addressing a long-standing manufacturing concern. Edges have often been described as the weakest point in panel production. This issue has now been tackled through Hymmen’s advanced edge coating technology, which ensures that both surfaces and edges are finished in a single automated process.
In conventional production, panel surfaces are treated using highly automated systems. However, edges frequently require manual finishing. This creates inefficiencies. It also increases production time. Achieving waterproof edges and a visually flawless finish has remained challenging. Consistency has often been difficult to maintain.
Hymmen has demonstrated a solution that closes this gap. Its technology enables simultaneous surface and edge finishing. The process is carried out in one pass. Manual intervention is significantly reduced. A uniform and high-quality result is achieved. The system is particularly suited for furniture panels and formwork panels.
The production process developed by Hymmen is designed for flexibility. Coating lines offer variable working widths. Line speeds can be adapted easily. Production speeds from 10 to 120 metres per minute can be achieved. Even panel widths of up to 3,000 mm are handled efficiently. These features allow the system to serve a wide range of industries.
The process begins at the infeed stage. Panels are subjected to an initial quality inspection. They are then transferred into the production line using a “flying stack change” system. Downtime between stacks is eliminated. Continuous operation is maintained.
Defects are identified early in the process. Both faces and edges are examined carefully. Repairs are carried out where required. Only A-grade material is allowed to continue. Defective panels are removed from the flow. This ensures consistent product quality.
Material handling is fully automated. Belt conveyors are used to move panels through the system. Turning devices adjust orientation when necessary. Edge brushing machines prepare surfaces for coating. In certain layouts, angled transfers with buffer zones are incorporated. These features help maintain a smooth and efficient workflow.
The coating process is executed in stages. In the first edge coating stage, front and rear edges are treated. In the second stage, longitudinal edges are coated. Each stage includes primer, basecoat, and topcoat application. UV curing is applied to enhance durability.
Surface coating is performed in a similar manner. Uniformity is maintained across all areas of the panel. The integration of processes ensures consistent results. Precision is achieved throughout production.
After coating, panels are removed from the conveyor system. This task is performed by a portal handling unit. Panels are then stacked with precise edge alignment. This is carried out on one of two stacking roller conveyors. Accuracy is ensured at every stage.
The efficient production workflow is relevant across multiple industries. Furniture panel manufacturers benefit from improved finish quality. Formwork panel producers gain enhanced durability. Both sectors require reliable and efficient processes. Hymmen’s system meets these needs effectively.
All users benefit from the following advantages:
✔️ Top Quality: high-grade edge sealing
✔️ Efficient Manufacturing: surface and edge finishing in a single pass
✔️ High Capacity: consistently industrial-scale throughput
Short production cycles are achieved. Manual processes are minimised. Product quality is enhanced. The system addresses key challenges in panel finishing.
To support implementation, Hymmen offers access to its dedicated Technical Center. Prospective customers are given the opportunity to test their specific processes. Trials are conducted under real production conditions. This ensures accurate system configuration.
The overall plant architecture can be tailored precisely. Individual requirements are taken into account. Risks during implementation are reduced. Operational efficiency is improved.
The Technical Center is regularly used by Hymmen customers. It provides valuable insights into process optimisation. Manufacturers can validate system performance before making investment decisions. Confidence in the technology is strengthened.
Hymmen’s innovation reflects wider industry trends. Automation is becoming essential. Precision and efficiency are key priorities. Manufacturers are investing in advanced production systems.
Edge sealing has long been a weak point in panel processing. This challenge has now been effectively resolved. Hymmen continues to lead advancements in industrial coating technology, setting new standards for quality and efficiency in wood-based panel manufacturing.
Read more news on Hymmen
Get more updates on American woodworking industry through: www.woodandpanel.us
Tags: automated panel finishing, edge coating innovation, Hymmen, Hymmen edge coating system, panel production systems, wood panel edge sealing, woodworking industry, woodworking UK
Comments: