Tuesday, August 2, 2016
When Erwin Jenkner founded HOLZMA 50 years ago, he showed courage and business acumen. Two characteristics that have always paid off for HOLZMA. Today, the company delivers its saws to customers throughout the world and, as market leader, develops the technologies of tomorrow. 50 years of HOLZMA are therefore also 50 years of innovation. And, as always, that is what it is all about at HOLZMA Treff. From September 20 to 23, 2016, the factory will open its doors to prospective buyers, customers and sales partners daily from 9am to 5pm. Besides the latest new products revolving around the cutting process, there will also be attractive anniversary offers awaiting the visitors. DÜRR will be at HOLZMA Treff for the first time. The company will be exhibiting products associated with paint application technology. And BRANDT will be launching new airTec technology for the perfect zero joint.
New module45 – for precise bevel cuts on the saw
Why is nearly every pocket-knife today a multi-tool? Because all-rounders save a lot of individual tools, are extremely efficient in use and unbelievably practical ¬– just like the new module45 from HOLZMA. This technological innovation now allows all bevel cuts to be completed directly on the HOLZMA saw. It is fast, simple and angles can be adjusted continuously. The ingenious additional unit can be seen for the first time at HOLZMA Treff 2016, a real highlight for nearly all customers, because the new module45 is available for the HPP 130, as well as for all models of the 2, 3 and 4 series.
The benefits of module45
• Retrofit (depending on year of manufacture and model)
• Low investment costs, high benefits
• Easy one-man operation
• Less waste and higher quality thanks to less transport damage as the material remains on the one machine
• Unbeatable cost-benefit ratio and considerably less expensive than solutions from competitors
Fast, simple, intuitive: the new operator assistance system
Production processes in the woodworking sector are by now networked to a high degree. Although this has increased efficiency in production tremendously, in practice it does lead to processes and tasks becoming more and more complex. The cutting process could develop into a discipline that in future only experts will be able to master. In order to prevent precisely this from happening and to ensure that production in terms of personnel costs remains competitive, HOLZMA has been developing increasingly intelligent operating systems for years now.
Right on cue for this year’s Treff, HOLZMA has achieved a major step towards the future with its latest operator assistance system. The principle behind the new development is as follows: along the cutting line there is an LED strip that, using light signals, guides the machine operator competently and dependably through the processing procedure. The operator intuitively understands what he should do next – without looking at the monitor screen and with no tedious searching or sorting.
The operator assistance system is now available for nearly all saws of the HOLZMA 3 and 4 series.
Cut Rite: optimization continues
Efficient processes are very important for production. HOLZMA customers establish a basis for this with Cut Rite.The latest generation of this optimization software – Cut Rite V 10 – has been on the market since HOLZMA Treff 2015. The anniversary will see the launch of version 10.02, with many new enhancements that will be presented to the public for the first time at the in-house exhibition. The focus lies on communication between Cut Rite, the saw and the storage system, among other features.
Important new features in brief:
• Automatic allocation of panels during the optimizing process
• Improved parameterization for robot-controlled concepts
• Even more effective nesting of small parts
And much more
HPS 320 flex Tec: batch size 1 cutting on a grand scale
The HPS 320 flexTec, the top innovation at LIGNA 2015, can again be marveled at live and in action at HOLZMA Treff. HOLZMA has revolutionized batch size 1 production with this new development. The innovative cutting cell is purpose-designed for processing single panels and completely redefines the part flow – with fully automated processes and unlimited recuts. The HPS 320 flexTec is interesting for both the craft sector and industry.
• Fully automated processes
• Unlimited recuts
• Highly flexible cutting pattern layout
• Output: up to 1500 parts per shift
• Automatic parts labeling
• Automatic handling of offcuts
• Extremely gentle handling of material
What else will be there to see HOLZMA Treff?
50 years of HOLZMA is an excellent reason to celebrate – and that is exactly what company is going to do, with all its customers and visitors to HOLZMA Treff.
In addition to the innovations and new product features presented here, visitors can also look forward to an extensive program with special anniversary offers and plenty of opportunities to exchange knowledge and experience with experts. Among others, the teams from Systems + Production Lines, Software and Service will be on hand at the exhibition for this purpose. Visitors will also be able to see single saws, a saw-storage combination, current angular saw units, the HOLZMA HPP 300 multiTec and plastics saws from the HOLZMA P series.
PRACIVE partners from the HOMAG Group
Sister companies from the HOMAG Group will again make use of the opportunity to showcase their own range of products and services at HOLZMA Treff. The benefit for customers: all HOMAG Group machines are, from the start, perfectly coordinated and can quickly and easily be combined into complete production lines. There will again be a number of machines on show in Holzbronn. The highlights:
• BRANDT
• BÜTFERING
• DÜRR
• HOMAG Automation
Tags: 50 years of innovation, airtec technology, BRANDT, customers and sales partners, DÜRR, golden jubilee, holzma, Holzma treff, HPS 320 flex Tech, module 45, new products, paint application technology, prospective buyers, September
Comments: