Monday, December 19, 2016
Sorbini is continuously proving itself as an outstanding performer and once again it has proved by producing Smartparquet line, which is ideal for the application of natural oils, UV oils and coats, urethane oils, traditional waxes, stains and pigmented products. The coating line can handle parts up to a maximum width of 300mm.
It is suitable for small-to-medium production requirements and small production spaces. Modular engineering makes Smartparquet the right machine for many production requirements. Coatings are collected and recycled for maximum cost-effectiveness. The standard configuration includes roller coatings application with a doctor roller for consistency, wiping with counter-rotating brushes to facilitate penetration.
What it does:
• Coating line up to a maximum width of 300mm, suitable for medium-small productions, to be installed in limited spaces
• Extremely easy use
• Great flexibility in the machine composition – thanks to modular solutions – according to the different working cycles
• It allows collecting the coating product at the end of the coating process
Benefits:
“Standard” SMARTPARQUET. This configuration is suitable for the application of natural and urethane oils.
Cycle
• Roller application on previously sanded and/or brushed parquet planks.
• Wiping by two counter-rotating brushes.
• The roller coater applies coatings or oils on flat panels through the contact between a rubber roller called “application roller” and the panel conveyed on the belt.
• The application roller holds some coating on its outside, and it works in contact with a roller called “doctor roller”.
• The chromium plated doctor roller is assembled on a support which allows moving it near to or away from the application roller, with the very effect to “dose” the thickness of the coating and guarantee a constant application.
• Wiping is made through counterrotating brushes which facilitate the penetration of the just applied stain or oil into the wood brushed pore, thus making the application uniform.
“Upgrade” SMARTPARQUET. The standard coating line can be extended – also at a later date due to new production requirements – by adding further units.
Cefla is going to exhibit at Domotex from January 14 to 17, 2017.
Tags: Cefla, coatings, cost-effective, domotex 2017, Modular engineering, natural oils, outstanding performer, roller coatings application, Smartparquet line, Sorbini, stains and pigmented products, traditional waxes, urethane oils, UV oils and coats
Comments: