• Swiss Krono produces first plate in Barnwell

    Published on : Thursday, September 19, 2019

    Swiss Krono produced their first plate on August 24 in their factory in Barnwell, USA. This was a very special milestone for Erik Christensen, he was the Site Manager of Swiss Krono.   “It’s an exciting time here in Barnwell …

    Read More

  • Dieffenbacher showcases advanced solutions for production process at K 2019

    Published on : Monday, September 16, 2019

    Dieffenbacher will be at K 2019 booth A02 in hall 14 in Düsseldorf from October 16 to 23 to showcase techniques and technology for advancing production process. Companies need support to manage the end product to the production process. There …

    Read More

  • EGGER Biskupiec Plant starts production

    Published on : Friday, August 2, 2019

    On June 28, 2019, EGGER Biskupiec began to operate its state-of-the-art chipboard production plant for furniture manufacturing. It is the EGGER Group’s 19th plant in the world, with capacity of 650,000 cubic meters of chipboard and an investment of €440 …

    Read More

  • Dieffenbacher provides four ClassiSizer units to Biosyl

    Published on : Monday, September 3, 2018

    Biosyl, a leader in the field of renewable energy from biomass and the production of wood pellets in France, has accepted its second ClassiSizer from Dieffenbacher. Biosyl operates one of the country’s largest pellet plants in Cosne-Cours-sur-Loire, about 200 km …

    Read More

  • HOMAG Group acheives a successful first half of 2018

    Published on : Monday, August 13, 2018

    In the first half of 2018, the HOMAG Group recorded an increase in sales over the previous year and once again achieved a high level of incoming orders. With capacity utilization remaining high, the world-leading supplier of integrated solutions for …

    Read More

  • Dieffenbacher particleboard plant helps Anhui Kelin to start project

    Published on : Friday, June 15, 2018

    On February 7, 2018, Chinese wood-based panel manufacturer Anhui Huaining County Kelin Wood Industry Co. Ltd. produced the first board on its new Dieffenbacher particleboard plant. Acceptance of the plant took place on May 4, two months prior to the …

    Read More

  • Dieffenbacher to produce THDF plant in China

    Published on : Wednesday, May 30, 2018

    A state-of-the-art THDF plant producing ultrathin boards primarily for use by furniture makers will be built by Dieffenbacher for Guangxi Lelin Forestry Development Co. Ltd. in China by June 2019.   Guangxi Lelin will produce boards ranging from 1 to …

    Read More

  • Siempelkamp demonstrates powerful technologies at Xylexpo

    Published on : Thursday, May 10, 2018

    Siempelkamp, the German machine manufacturer, unveils its technological innovations for the production of MDF and particleboards made of rice straw and other annual plants at Xylexpo 2018 in Milan. Annual plants are growing in importance in view of the worldwide …

    Read More

  • Greenply manufactures first Board from Dieffenbacher

    Published on : Wednesday, April 25, 2018

    Greenply Industries Ltd. has produced the first board on its new MDF plant in Chittoor District, Andhra Pradesh, India. The new line is the second MDF project that the Indian wood-based panel producer and the Eppingen-based plant manufacturer have completed …

    Read More

  • HOMAG associates with Grenzebach Group

    Published on : Thursday, April 5, 2018

    The HOMAG Group, the world’s leading supplier of integrated solutions for production in the woodworking industry and woodworking shops, has joined forces with the Grenzebach Group, leading specialist for the automation of industrial processes. They announced their strategic partnership at …

    Read More

  • Dieffenbacher anticipates record-setting achievements in 2018

    Published on : Friday, February 23, 2018

    With 2018 just two months old, Dieffenbacher anticipates one of its busiest and most significant years ever based on the completion of record-setting wood-based panel plants.   In Grayling, Michigan, USA, Arauco will start production on the largest particleboard press …

    Read More

  • Forte manufactures its first board on a ContiRoll

    Published on : Tuesday, February 20, 2018

    On December 15 of last year, the Siempelkamp installation team announced the production readiness of the single-source turnkey plant for particleboard in the town of Suwalki in northeastern Poland. That meant that the plant was put into operation one-and-a-half months …

    Read More

  • Salvamac witnesses a successful journey of eighteen months

    Published on : Wednesday, December 13, 2017

    Eighteen months of success for Salvamac, a company founded in 2016 for the production of semi-automatic and manual cross-cutting saws, quality entry-level solutions that require low investment, but make a substantial contribution to a faster, safer and more efficient production. …

    Read More

  • Swiss Krono further assigns Dieffenbacher CPS+

    Published on : Monday, October 16, 2017

    Chairwoman of the Board of Directors Ines Kaindl-Benes and her guests celebrated the production of the first board at the new particleboard plant at the SWISS KRONO site in Menznau on September 13.   Dieffenbacher supplied all the essential machines, …

    Read More

  • Schattdecor to invest in ‘Saintdecor’ in China

    Published on : Wednesday, October 11, 2017

    In the field of impregnation (impregnated Surfaces by Schattdecor), Schattdecor has already communicated the participation in the Chinese impregnation site Saintdecor in Huanggang. With the conclusion of the joint venture agreement at the end of March 2017, they took over …

    Read More

  • Dieffenbacher receives MDF plant order from Thien Lam Dat JSC

    Published on : Tuesday, June 6, 2017

    On the second day of LIGNA 2017, Vietnam-based Thien Lam Dat JSC and Dieffenbacher sealed the deal for a complete MDF plant in Bac Giang, about 50 km east of Hanoi.   At the signing ceremony, Dang Quoc Lich, Chairman …

    Read More

  • HOLZ-HER to present modern production techniques at LIGNA 2017

    Published on : Thursday, March 2, 2017

    HOLZ-HER GmbH is presenting itself for the first time at LIGNA 2017, along with the Weinig Group in Hall 27. This means that a complete range of machining for both solid wood and derived timber products will be presented to …

    Read More

  • Smart Tools from Leitz assist in complex manufacturing

    Published on : Friday, February 24, 2017

    The new era of manufacturing, Industry 4.0 and The Smart Factory, presents new opportunities for production processes in manufacturing and for the tools used. In the future, tools will not only be responsible for the processing quality of the workpiece, …

    Read More

  • Siempelkamp to supply for two new MDF/HDF plants for the Asian market

    Published on : Tuesday, January 10, 2017

    Two new orders from customers in Asia emphasize Siempelkamp’s leading role as systems supplier for press technology: Chinese Yekalon-Jiufngyuan Panels, Inc. and Vanachai Group Public Limited from Thailand decided to expand their MDF/HDF production lines with the help of the …

    Read More

  • Woodtech Forum sees great success

    Published on : Monday, December 12, 2016

    The first International Woodtech Forum, that took place from November 26 to 27 in the city of Damietta in Egypt, was a resounding success with more than 3,000 visitors and 52 exhibitors and supporters. The Forum, which was organised by …

    Read More

Follow Us
facebook-logo twitter-logo LinkedIn_logo  rss_logo 
mobile-icon  ttw_blogger_logo  ttw_blogger_logo  ttw_blogger_logo  ttw_blogger_logo



  • 01 WEINIG
  • 06 kleiberit 2019
  • 07 barberan 2018
  • 08 leitz 2018
  • 09 Chem-Trend
  • 10 Woodex 2020 2020
  • 11 AFRIWOOD 2020
  • 20 interzum-guangzhou 2019