Friday, November 20, 2015
EAM-Mosca brings ROMP-6-50/4 Narrow Sealer Strapping Machine, specially adopted for tightly strap small, non-compressible packages. It is well suited for securely tying bundles of wood molding, metal and plastic tubes and extrusions.
The unit has an arch opening of 500mm wide x 400mm high. It is able to reliably secure bundles as small as 3″ wide x 2″ tall with 5, 8 or 12mm wide Polypropylene strapping. It may be possible to successfully strap smaller bundles with wider straps under certain conditions. Testing is recommended to verify performance below the 3″ x 2″ guideline.
“While plastic strapping typically elongates during the bundling process, it does possess some elastic recovery. However, small bundles of un-compressible products offer a challenge for most strapping systems to apply tight, secure straps.” Comments Ralph. E. Morini, President. The ROMP-6 Narrow Sealer addresses these issues with a specially adapted sealing head with a small seal footprint and a modified table that positions the product very close to the sealing mechanism to minimize tension loss when the machine releases the sealed strap loop.
The Evolution ROMP-6 represents Mosca’s newest technology and best ever family of high-performance strapping equipment. It is built in a high precision fixture that provides exceptionally reliable performance over millions of machine cycles. The strap track, from dispenser through sealing head can be disassembled and cleaned, without tools in minutes. Sealed bearing construction minimizes the impact of dust and dirt on performance, extending service intervals and reducing operating costs.
Tags: Eam-Mosca, ROMP-6-50/4, special bander
Comments: