Leuco brings Panel sizing saw blade Q-Cut G6 at LIGNA
Published on : Friday, May 31, 2019
Dividing laminated panels in best quality is the strength of the carbide-tipped Q-Cut G6 from LEUCO, one of the leading international suppliers of end-to-end tool solutions and intelligent services for the wood processing industry. This saw blade now achieves longer edge lives. The Q-Cut G6 is part of the Q-Cut family. What they have in common is the finish-cut quality.
Good finish-cut quality for any task
The product family Q-Cut consists of four saw blade types which are characterized by their high cutting quality on horizontal panel sizing saws. All these blades are equipped with a low-vibration tool body. The tool configuration differs according to the material to be processed.
The Q-Cut G6 is the saw blade most used in this family. For many carpenter’s shops and furniture manufacturers, it is a standard tool for the sizing of laminated panels. It is available in the diameters 280 to 520 mm. Its tooth group configuration G6 with two leading teeth with an increased cutting performance and four following teeth is designed for long edge lives. The Q-Cut G6 nn-System generates only a low noise level with similar processing results.
The Q-Cut G5 is provided with a tooth group configuration consisting of a leading tooth and four following teeth. This tooth configuration is used for finish-cut quality in plywood, veneered wood-based materials, panels with sensitive top layers as well as lightweight panels. The saw blade Q-Cut K is a special tool for anti-fingerprint and plastic panels.
In the Q-Cut family, woodworking companies can find the right tool for every sizing process for finish-cut quality: Q-Cut K, Q-Cut G5, Q-Cut G6 and Q-Cut G6 nn-System (see image: from left).